混凝土冬季施工定额的编制

混凝土冬季施工难度大、效率低、费用高,国内对混凝土冬季施工增加费的计算没有统一的实物量定额计价标准,费用很难控制。新疆水利水电工程补充预算定额编制了混凝土冬季施工实物量定额,用以计算混凝土冬季施工增加费。该定额以理论计算为基础,参考了大量工程实例,以绝对量分析方法编制了混凝土冬季施工消耗定额标准,该定额可操作性强,计价简便,费用计算较为准确,实现了由费率形式过渡到实物量形式的创新。     

Cutoff rate and outage probability performance comparisons between DVB-T and DMB-T systems under mobile multipath channels

As an effective technique for combating multipath fading and for high-bit-rate transmission over wireless channels, orthogonal frequency-division multiplexing (OFDM) is extensively used in modern terrestrial digital television broadcasting systems to support high performance bandwidth-efficient multimedia services. Cutoff rate and outage probability are two important criteria to evaluate the performance of a practical communication system in radio engineering. In this paper, the cutoff rate and outage probability performance are compared between two important terrestrial digital television broadcasting systems, the cyclic prefix OFDM based DVB-T system and the time domain synchronous OFDM based DMB-T system, under different mobile multipath channel conditions. The DVB-T system and the DMB-T system are summarily introduced. The cutoff rate and outage probability expressions are developed, and simulation results are given for both the DVB-T system and the DMB-T system.     

GS-08乙苯脱氢催化剂在广石化的应用

乙苯脱氢催化剂GS-08催化剂在广州石化总研制的首次应用。     

Crystallographic shear planes in nanocrystalline SnO2 thin films by high-resolution transmission electron microscopy

Atomic structures of crystallographic shear planes (CSPs) in nanocrystalline thin films of semiconductor SnO₂ were investigated by high-resolution electron microscopy. The films were prepared by electron beam evaporation in high vacuum (10^–6 torr) and followed by annealing in synthetic air at 700 °C for 1–2 H. CSPs with the displacement vector of [1/2 0 1/2] were observed in the planes parallel to (¯101), (110) and (¯3¯21). Most of the CPSs were found to terminate or interact with each other within SnO₂ crystallites. Partial dislocations exist at terminal places of CSPs or along intersecting lines of CSPs. CSP steps were also observed. Structural models of these defects have been proposed. Based on analysis of experimental data, it has been suggested that the Sn/O ratio at CSPs which are not parallel to their displacement vector, at cores of partial dislocations and at CSP steps, is higher than that of the perfect structure, that is, these defects are able to provide extra free electrons with the films.     

Induction of superoxide dismutase isozymes by tumor necrosis factor-alpha and lipopolysaccharide in cultured normal and hyperplastic gingival fibroblasts

We studied 722 reexcision scars of benign and malignant lesions (except melanocytic lesions) excised over a 24-month period. The formalin-fixed, paraffin-embedded tissue sections were examined histologically and immunohistochemically. The histological features of melanocytic hyperplasia were present in 59 cases (8%), 56 from the sun-exposed skin of the face and neck and three from the trunk [p < 0.00001]. The most common sites were the nose and lower eyelids, but the forehead was also frequently involved. Of the 59 patients, 41 were women (p < 0.0001). Basal cell carcinoma was the most frequent original lesion in both sexes (80%). No melanocytic hyperplasia was found in 663 cases (298 on the trunk and extremities and 365 on the head and neck). We have seen this reaction pattern following reexcision of melanocytic lesions as well. Thus, interpreting reexcision margins when lentigo maligna or similar lesions are reexcised may be fraught with difficulty. It is important for pathologists and dermatopathologists to recognize this phenomenon because histologically the presence of increased numbers of large melanocytes could be misinterpreted as melanoma in situ.     

小浪底斜心墙堆石坝的地震反应分析

采用等价粘弹性动力有限元模型，结合有效应力法，对黄河小浪底斜心墙堆石坝最终设计断面在淤积后期受地震作用的动力特性进行了分析。分析时考虑了淤积土体内有未消散的超静孔压。结果表明明，坝体受里氏６．５级地震时，下游坝基及上游淤土表层均有一定范围的液化区，由于坝基液化区距坝体较远，因而只影响到坝趾压戗的局部；当坝体受里氏８级地震时，坝趾下游近处的坝基沙砾石处于液化状态，上游库区淤土有较大较范围的液化区，在     

分子结构对增塑聚氯乙烯性能的影响

研究了聚合度、分子量分布和支化结构对增塑聚氯乙烯加工流变性能和物理力学性能的影响。结果表明，增塑ＰＶＣ的加工流变性能随聚合度的增加而恶化；拓宽分子量分布和引入支化结构均有利于加工流变性能的提高；增塑ＰＶＣ的拉伸强度随聚合度的增加而提高，而压缩永久变形却随之减小；分子量分布对物理力学性能的影响不大；支化ＰＶＣ的拉伸强度略有下降。     

ATM局域网仿真技术

本文介绍了ＡＴＭ局域网仿真技术并从ＡＴＭ仿真局网的组成、工作原理等方面介绍了这一技术的主要特点。